Payment & Shipping Terms:
|Type:||PCB Separator||PCB Separator Thickness:||0.3-3.5mm|
|PCB Separator Length:||200mm||Certification:||CE ISO|
|PCB Separator Lead Time:||One Day||PCB Separator Warranty:||One Year|
cab maestro 3e For PCB Separator Machine Pneumatic PCB Cutter For PCB Assembly
Air Driven PCB Depanelizer Features :
Ideal for thick PCBs
Can be used with aluminum, FR4, CEM3 and other substrates
Keeping pace with mid-to-large volume production
Panelized flexible or ultra-thin PCBs
Densely populated PCBs with components located too close to the score line for standard depanelers to handle
Aluminum and metalized substrates (in addition to FR4, CEM3, etc.)
PCBs are separated by the YES-450 dual wedge-shaped knives in one gentle rocking motion that shears the panel along the score line, without stress or damage to the PCBs or components. Even when metalized circuit boards are processed – such as those populated with heat-generating LEDs that require heat-dissipating metal inner layers – this machine will easily make the cut.
YES-450 pcb depanel also cuts flexible and ultra-thin PCBs (down to 0.5 mm thick) clean, with no ripping or tearing, even when sensitive components such as delicate ceramic capacitors, are mounted within 0.5 mm of the score line. The linear, rather than circular, cutting surfaces allow for faster separations without added stress.
Alignment between the YES-450'S linear cutting blades and the panel's score line is achieved using a knob at the top of the machine. The narrow separation between the upper and lower blades (a maximum of 4 mm) protects the operator from the blade edges
Our YES PCB Separator Competitive Advantage :
Pneumatically driven and electric control
The machine is pneumatically driven and electric control . The straight knife type separator machines were designed to separate pre-scored panel boards carefully, without bending or tension stress . Even
sensitive SMD-components like ceramic capacitors will not be damaged by the separate process . Due to the special design of the knives also boards with high components placed close to the edges can be separated safely . Based on a proven method of separating, wedge-shaped knives are used to cut the panels within the groove . This enables boards of less than 1 mm thickness to be separated safely and without creating stress .
V Groove PCB Separator Machine Advantages :
1. The cutting rate is one segmentation for one second , controlled by pneumatic pedal switch
2. The starting of the cutting set is for passive , so that the cutting tangent and position is under secure control . With little stress when cutting , there will no solder crack .
3. With cutting of nonroller (circular knife, straight knife ) type , there is no dust , no motor drive , and no carbon powder pollution .
4. With no-rubbing type cutting , there is no metal residue .
5. The blade can be used 600000 / times without power supply , avoiding the loss and change of electrical products .
6. The machine uses 5-7kg air compressor without specific cutting place , and it is maintained by wiping its appearance with the anti-rust oil
Applications of V Cut PCB Depaneling machine:
Cutting the aluminum base boards , FR4 , fiber glasses , pcba , etc.